Anker Soundcore Life Note 3 Manual Del Usuario página 8

Reset
You might need to reset the earbuds if you experience any connectivity problems
or function issues.
1. Place the earbuds in the charging case and leave the case open.
2. Press and hold the button on the case for 10 seconds until the 3 LED
indicators flash white for 3 times and then flash white in sequence continuously.
This confirms that the reset was successful and your earbuds can be connected
normally.
Specifications
• Specifications are subject to change without notice.
Input
Battery capacity
Charging time
Playtime (varies by volume level and
content)
Playtime (with ANC mode turned on) Up to 6 hours (Total 30 hours with the
5V ⎓ 0.35A
63 mAh x 2 (earbuds);
800 mAh (charging case)
3 hours
Up to 7 hours (Total 35 hours with the
charging case)
charging case)
6