Kawai CA5E Instrucciones De Montaje página 2

A
SSEMBLING THE
Before beginning the assembly of your CA5E, read and become familiar with the assembly
instructions that follow. Then, carefully unpack the piano and check your unit against the parts list.
PARTS PROVIDED
Side Panel (A)
Back Board (B)
Pedal Board (C)
Speaker Cover (D)
Screw (E) (M6 x 25)
Screw (F) (M4 x 12)
Screw (G) (ø4 x 20)
Screw (H) (M4 x 16)
Adjuster (I)
Washer (J)
Headphone Hook
Bottom View
(A)
4. Hold the Back Board (B) behind the Pedal
Board (C) and in front of the fixing metal of
the Side Panels (A).
5. Fasten the Side Panels (A) and Back Board
(B) with four screws (F).
6. Fasten the Pedal Board (C) and Back
Board (B) with four screws (G).
S
TAND
M6 x 25
2 pcs.
1 pc.
1 pc.
1 pc.
4 pcs.
4 pcs.
(E)
6 pcs.
Adjuster
4 pcs.
1 pc.
4 pcs.
1 pc.
(I)
(I)
(C)
(a)
(C)
(G)
(b)
ø4 x 20
M4 x 16
M4 x 12
(F) (G)
Washer
(J)
1. Insert the Adjuster (I) on the Pedal Unit.
2. Untie the pedal cable on the bottom of the
Pedal Board (C).
3. Slide the metal bracket located at the end of
Pedal Board (C) on to screws (a) and (b) of Side
Panel (A). Install tighten screw (G) then tighten
screws (a) and (b). Repeat this procedure on
the other end of the Pedal Board, then raise the
completed stand assembly.
(F)
(B)
(A)
(G)
(H)
(C)