Mounting I Montage I Mo
3t~l3t~l" ~;JII"-
. ..
'
rv
fll~~~A~
I Pemasangan ,
Before mounting
A depth of at least 56.5 mm (2
1
/4
in) is required
to mount the woofer. Measure the depth of
the area where you are to mount the speaker,
and ensure that the speaker is not obstructing
any other components of the car. Keep the
followings in mind when choosing a mounting
location:
• Make sure that nothing is obstructing
around the mounting location of the door
(front or rear) where you are to mount the
speaker.
• A hole for mounting may already be cut out
of the inner panel of the door (front or rear).
In this case, you need to modify the board
only.
• If you are to mount this speaker system in
the door (front or rear), make sure that the
speaker terminals, frame or magnet do not
interfere with any inner parts, such as the
window mechanism in the door (when you
open or close the window), etc.
Also make sure that the speaker grille does
not touch any inner fittings, such as the
window cranks, door handles, arm rests,
door pockets, lamps or seats etc.
• The suitable mounting location for the
tweeters varies depending on the type of
car. Choose a location that suits your car.