Publicidad
Idiomas disponibles
Idiomas disponibles
Beforeassembling vacuum, c heckthe
PACKING LISTon the coverof the separate
RepairPartsList.Usethis list to verifythat
youhavereceived all the components o f
yournewKenmore vacuum,
WARNING
Electrical Shock
Hazard
Do not plug into the electrical sup-
ply until the assembly
is complete.
Failure to do so could result in elec-
trical shock
or injury.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum.
Position the handle as shown in the illustra-
tion below.
While holding the power cord out of the way,
slide the handle into the opening at the top
of the vacuum
Handle
Handle
Screw
Hole
Insert the screw so it passes through the
handle into the vacuum°
Begin to tighten the screw with your fingers°
it may be necessary
to adjust the handle
slightly
Publicidad
