Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO START
Release
1. Turn the
quick release
cord hook to
either side and
down to
release the
power cord,
2, Release the power cord plug from the
power cord and pul! the cord off the quick
release cord hook. Check to be sure the
power cord is still locked into the locking
notch in the upper cord hook,
3, Check to see if the cleaner has bag
installed.
See DUST BAG CHANGING.
WARNING
Personal
Injury
and Product
Damage
Hazard
• DO NOT plug in if switch is in the
ON position,
Personal
injury
or dam-
age could
result.
• DO NOT use outlets
above
coun-
ters. Damage
to items in surrounding
area could occur.
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized
plug,
one blade is wider than the other° This plug
will fit in a polarized
outlet only one way_ If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified technician
to install the prop-
er outlet Do not change the plug in any
way.
4, Plug the polarized
power cord into a 120
Volt outlet located near the floor_
To select
a pile height setting:
Turn off cleanen Select a pile height setting
by tilting the cleaner back until front wheels
are lifted slightly off the floor as illustrated,
Slide the adjustment
lever to the correct
setting
Models with no selector adjust automatically
for varying carpet heights.
You may need to raise the height to make
some jobs easier, such as scatter rugs and
longer pile carpets
Suggested
settings are:
Models with two (2) positions:
HIGH: medium to long pile.
LOW: short to medium pile.
Models with four (4) positions:
HIGH: shag carpet, long pile, plush, scatter
rugs
MED: medium to long pile
LOW: short to medium pile.
EX LOW: very low pile
Place unit in "HIGH" when
using attach-
ments
to prevent
possible
floor
damage.
Publicidad
