Publicidad
Idiomas disponibles
Idiomas disponibles
Door reversal
English
If the product is placed upside down or on its side during this process,
it should be left in an upright position for 6 hours before plugging in to
prevent damage to internal components.
1. Remove the screw hole cover from the top left side. Remove the top
hinge cover. Remove freezer door.
2. Remove the center hinge from the right side of the cabinet.
3. Remove the bottom hinge from the lower right side of the cabinet.
4. Remove the pin shaft to the right hole of the bottom hinge, then insert
the pin shaft into the left hole of the bottom hinge.
5. Install the bottom hinge to the lower left side of the cabinet.
6. Remove the freezer door stop from the bottom right side to the left
side of the door. Remove the left door stop from the accessory bag
door, install it on the lower left side of the refrigerator door.
7. Move the door bushing from the top right side of the refrigerator door
and remove the hinge hole cover from the top left side of the door.
Swap their positions.
8. Install the freezer door on the cabinet. Install the centre hinge on the
left side of the cabinet. Install the screw hole covers on the right side of
the cabinet.
9. Install the refrigerator door. Install the upper arm on the upper left
side. Install the screw hole cover on the upper right side.
Note: These instructions refer to models that come from the factory with
a right hinge door. If your product has a left hinge, be sure to turn "left"
and "right" in these instructions.
infiniton.es
39
Publicidad
