Alpina AF261M Manual De Instrucciones página 6

OPERATING INSTRUCTIONS
1. Plug into any 230~50-60 Hz, AC source.
2. Your heater is equipped with a 4-position rotary
switch
SYMBOL
O
*
I
II
3. Set the rotary switch to maximum for fast warm up
of a room. Once the room is comfortable, select a
lower setting to reduce electrical consumption and
to prevent the room from becoming too warm.
4. Adjust the thermostat to maximum and select the
desired power setting. Once the room is comfortable,
rotate the thermostat counterclockwise, until the
heater shuts off. The thermostat will now maintain
the temperature by cycling the heater on or off.
During particularly cold weather, the low power
setting may be insufficient to satisfy the thermostat.
Select a higher setting for these periods.
5. Before switching off and better work for 5-10 second
in cool condition.
FUNCTION
OFF
BLOW COOLING AIR
HALF HEAT OUTPUT
FULL HEAT OUTPUT