Magmaweld monoCUT 45ix Manual Del Usuario página 13

monoCUT 45ix / monoCUT 45i
1.3 Product Label
Three Phase Transformer Rectifier
Vertical Characteristic
Direct Current
Plasma Cutting
Mains Input 3-Phase Alternating Current
Suitable for Operation at
Hazardous Environments
Temperature (C°)
Duty Cycle
As defined in the standard EN 60974-1, the duty cycle rate includes a time period of 10 minutes.
6 min.
For example, if a machine specified as 100A at %60 is to be operated at 100A, the machine can cut without
interruption in the first 6 minutes of the 10 minutes period (zone 1). However, the following 4 minutes
should be kept idle for the machine cool down (zone 2).
www.magmaweld.com
4 min. 6 min.
Duty Cycle
X
Open Circuit Voltage
U0
Mains Voltage and Frequency
U1
Rated Welding Voltage
U2
Rated Mains Current
I1
Rated Welding Current
I2
Rated Power
S1
Protection Class
IP23S
4 min. 6 min.
Technical Information 13
Time (min.)
4 min.
USER MANUAL
EN