To Level Griddle Module
[]
Level Adjusters are located on the underside of the Module as shown.
[]
Adjust the 4 preassembted Level Adjusters using the wrench provided.
- Turning adjusters clockwise raises the height.
- Turning adjusters counterclockwise
lowers the height.
IMPORTANT:
For illustration purpose the Module Set is shown
on a tilted angle. FOR YOUR SAFETY-DO
NOT TILT your Module
at any time.
-
..j-
\\\\•
Wrench
Qty. 1
Part # P05515017L
(The
wrench
is not provided,
please
find
it
from
16655900
grill pack)
Top Z Panel
./
,_
rench
/
---
Level
Adjuster
Use your griddle at least 3 feet away from any wall or
surface.
DO NOT obstruct the flow of air for combustion
and
ventilation.
DO NOT lift Module from the Top Panel when moving or
assembling the unit.
H
Install
Ignitor
Battery
[] Unscrew
Ignitor Cap from Control Panel.
[] Place supplied AA battery into the Ignitor Slot with positive
pole facing you.
[] Position the Cap and Spring over the AA battery and
tighten onto Control Panel.
AA Battery.\
Ignitor Cap _-_:::_
/
Spring
Ignitor Slotf
7