Publicidad
Idiomas disponibles
Idiomas disponibles
17
a. Thermostat button
b. ＋ button for increasing the temperature and the
operating hours
c. Power/mode button
d. Timer button
e. -: Button for decreasing the temperature and the
operating hours
f. Stand-by button
Remote control
battery (2025-3V)
Move the appliance using the integrated handle.
The remote control can be stored in the compartment integrated into the unit on the rear
wall when not in use.
Switching on
Press the on/off switch [F] to switch on the unit. The unit is now in standby mode and is waiting
for a mode to be selected using the keys on the unit or the remote control.
The unit emits a beep.
The light (
) lights up.
The following settings can be made via the touchpad or the remote control.
A beep sounds each time a button is pressed.
Press the standby key [f] to exit standby mode and start selecting the different modes. The
heater starts to operate in Eco mode.
Setting the heating power and the Eco mode
Press the Power/Mode(c) button to switch between the standard Eco mode (ECO) High
power (
)
Medium power (
) Low power (
) .
At low, medium and high power, the heater continues to operate in a controlled manner by
thermal cut-off.
Note:
The higher the power, the faster the desired temperature is reached, but the power
consumption is higher.
Lower power levels are recommended if the heater is used for a longer period of time.
Eco mode
Press the Power/Mode button (c) until the "ECO" light comes on.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
Publicidad
