Marmitek Speaker Anywhere 650 Manual De Instrucciones página 11

6 Use
The Speaker Anywhere 650 has no auto standby mode. If the set is left idle
for an extended period, switch it off like this: always first switch off the
receiver, followed by the transmitter (if necessary). This is to avoid a pop
coming from the speakers. If you want to switch the set back on, always first
switch on the transmitter and then the receiver.
7 Extra set
Up to 6 different sets of Speaker Anywhere 650 can be used in the same
area. The transmitter and receiver make use of 'secure pairing', which makes
it possible to use multiple sets of Speaker Anywhere 650.
With multiple sets of Speaker Anywhere 650 in the same room, you can
make your rear and front speakers wireless. You could also connect a
transmitter to the 'Speaker B' output of your AV receiver and use the receiver
to install an extra set of speakers in your kitchen, bedroom or any other room.
8 Extra receiver(s)
You can pair up to 3 Speaker Anywhere 650 receivers to one transmitter. By
doing this, you can use separate receivers for both your left and right back
speakers. Beside connecting you back speakers, you could also use extra
receivers to extend your audio system to other rooms like your kitchen,
bedroom or any other room.
Extra Speaker Anywhere 650 receivers are sold separately on marmitek.com.
Speaker Anywhere 650™ 11