Publicidad
Idiomas disponibles
Idiomas disponibles
CEILING CANOPY INSTALLATION
1
Tuck connections neatly into ceiling outlet box.
Remove one screw on bracket and slide the canopy up to
2
mounting bracket and place the key hole on screw on the
mounting bracket, turn canopy until it locks in place at the
narrow section of the key holes.
Align the circular hole on canopy with the remaining hole
3
on the mounting bracket, secure by tightening the two set
screws.
NOTE: Adjust the canopy screws as necessary until the
canopy and trim ring are snug.
Make sure the hook on the hanging bracket properly sits in the groove in the hanger ball before
attaching the canopy to the bracket by turning the housing until it drops into place.
Ceiling fan
outlet box
Hanger bracket
Canopy
Trim ring
Fig. 1
WARNING:
Fig. 1
Groove
Screws
©2023 Hinkley Lighting, Inc. | hinkley.com |
09
Publicidad
