Hinkley SCULPT Manual De Instrucciones página 14

FAN WITHOUT LIGHT KIT (OPTIONAL)
WARNING: Before starting installation, disconnect the power by
turning off the circuit breaker or removing the fuse at fuse box.
Turning power off using the fan switch is not sufficient to prevent
electric shock.
NOTE: The metal plate assemblyr included with your fan is an
option to replace the LED light kit for the light in the event that
you prefer not to use the light feature of your fan. The metal plate
assembly is not necessary for the light operation; it can be saved
for later use if desired.
1
2
3
4
5
6
7
| hinkley.com
12
Adapter plate
Metal cover
Allen wrench
Fig. 1
Adapter plate
Screws
Metal cover
Allen wrench
Fig. 2
Allen
screws
Mounting hub
(bottom of motor)
Allen
screws