Publicidad
Idiomas disponibles
Idiomas disponibles
•
Make sure that you can move and stand
safely. Check the area around you for
possible obstacles (roots, rocks, branches,
ditches, etcetera) in case you have to
move suddenly. Take great care when you
work on sloping ground.
•
Keep a good balance and a firm foothold at
all times. Do not overreach.
•
Deactivate the product before you move to
another area.
•
Never put the product down unless
you have deactivated it and removed
the battery. Do not leave the product
unsupervised when it is switched on.
•
Remove the battery before you pass the
product to another person.
•
Make sure that no clothes or parts of
the body come in contact with the cutting
attachment when the product is activated.
Keep the product below waist level.
•
If anything jams in the cutting attachment
while you operate the product, stop and
deactivate the product. Make sure that
the cutting attachment stops completely.
Remove the battery before you clean,
inspect or repair the product and/or the
cutting equipment. There is a risk of burns
as the gear housing can become very hot.
Use gloves when working with the trimmer
head.
•
Keep your hands and feet away from
the cutting attachment until it has
stopped completely when the product is
deactivated.
•
Watch out for stumps of branches that can
be thrown out when you cut. Do not cut
to close to the ground where stones and
other objects can be thrown out.
•
Watch out for thrown objects. Always
wear approved eye protection. Never lean
over the cutting attachment guard. Stones,
rubbish, etc., can be thrown up into the
eyes which can cause blindness or serious
injury.
•
Listen out for warning signals or shouts
when you wear hearing protection. Always
remove your hearing protection as soon as
the product stops.
•
Never work from a ladder, stool or any
other raised position that is not fully
secured.
•
If any unwanted vibrations occur, tap out
new line to give the line the correct length
to stop the vibrations.
2119 - 001 - 13.07.2023
•
Overexposure to vibration can lead to
circulatory damage or nerve damage
in persons who have poor circulation.
Speak to your physician if you experience
symptoms of overexposure to vibration.
Such symptoms include numbness, loss
of feeling, tingling, pricking, pain, loss
of strength, changes in skin color or
condition. These symptoms usually show
in the fingers, hands or wrists.
•
Always hold the product with both hands.
Hold the product on the right side of your
body.
•
Do not remove the cut material, or let
other persons remove cut material, while
the product is on or the cutting equipment
rotates, as this can result in serious injury.
•
Always stop the product, remove the
battery and make sure that the cutting
equipment does not rotate before you
remove unwanted material that is wound
around the shaft or caught between the
guard and the cutting attachment.
•
This product produces an electromagnetic
field during operation. This field may under
some circumstances interfere with active
or passive medical implants. To reduce
the risk of serious or fatal injury, we
recommend persons with medical implants
to consult their physician and the medical
implant manufacturer before operating this
machine.
•
Release the power trigger after each
working operation to save battery power.
•
Don't force the product. It will do the job
better and with less likelihood of a risk of
injury at the rate for which it was designed.
•
If any foreign object is hit or if vibrations
occur stop the product immediately.
Remove the battery from the product and
check that the product is not damaged.
Personal protective equipment
WARNING:
approved personal protective
equipment whenever you use
the product. Personal protective
equipment cannot eliminate the risk
of injury but it will reduce the
degree of injury if an accident does
happen. Ask your dealer for help
in choosing the right equipment.
Please read the operator's manual
carefully and make sure you
You must use
7
Publicidad
