ASSEMBLY INSTRUCTIONS
4.Battery
IMPORTANT: The battery may not be fully charged
when purchased. Before using the pole hedge trimmer for
charge. Make sure to read all safety precautions and follow
the instructions in the battery and charger manuals.
4a. To install the battery:
a. Align the battery with the battery compartment.
b. Insert battery into the battery compartment until battery
release button (G) locks into place. You should hear a
"click" once it is installed.
4b. To remove the battery:
a. Press the battery release button (G) on the battery
compartment.
This will cause the battery to raise out of the tool slightly.
b.
out of the tool.
4
13
G