Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
4. After each blade is sharpened, it is required to apply a
light machine oil or lithium-based spray-on grease (not
included) to the blades.
Transporting and storing
• Always place the blade cover on the blade before storing or transporting the pole hedge trimmer. Use
caution to avoid the sharp teeth of the blade.
• Clean the pole hedge trimmer thoroughly before storing. Store the pole hedge trimmer indoors,
in a dry place that is inaccessible to children. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
TROUBLESHOOTING
If you still have questions or an unresolved issue after going through this troubleshooting guide,
or just want to speak to a Kobalt product expert, please call our customer service department at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday – Sunday.
PROBLEM
Motor fails to start
when trigger switch is
depressed.
Motor runs, but cutting
blades do not move.
Pole hedge trimmer
smokes during
operation.
Motor hums, blades do
not move.
POSSIBLE CAUSE
1. Battery is not secure.
2. Battery is not charged.
Pole hedge trimmer damaged.
Pole hedge trimmer damaged.
Debris or other may be jamming
the blades.
CORRECTIVE ACTION
1. To secure the battery, make sure
the latch on the top of the battery
compartment snaps into place.
2. Charge the battery according to
the instructions included with your
model.
Do not use the pole hedge trimmer.
Call 1-888-3KOBALT (1-888-356-
2258) for technical service.
Do not use the pole hedge trimmer.
Call 1-888-3KOBALT (1-888-356-
2258) for technical service.
Remove battery, clear debris blockage
from blades.
17
Publicidad
