Hitachi RAR-5E2 Manual Del Usuario página 14

ECO OPERATION
ECO operation is an energy saving function by changing set temperature automatically and by limiting the
maximum power consumption value.
NOTE
● ECO function will not be effective when power consumption is low.
●
By pressing (POWERFUL) button, ECO operation is cancelled.
●
After auto restart, ECO operation is cancelled and previous operation mode shall start.
● For multi model connections, energy saving operation shall only start by changing set temperature higher
or lower automatically. However, effectiveness of ECO depends on operation conditions.
●
By pressing the
1
DEHUMIDIFYING or COOLING operation, the air conditioner
performs the "ECO" operation.
■ To start ECO operation
● Press (ECO) button during operation.
" " is displayed on the LCD.
A beep sound is emitted from indoor unit.
Energy saving operation will start by changing the set
temperature higher or lower automatically and reducing
operation power consumption. This function may vary based
on the connected outdoor unit.
■ To cancel ECO operation
● Press (START/STOP) button. Or
●
Press (ECO) button again.
" " disappears from the LCD.
A beep sound is emitted from indoor unit.
– 14 –
(ECO) button during AUTO, HEATING,