AUDIOCORE AC830 Manual Del Usuario página 5

12. Interface switching: In off state or working state, switch
between AUX and SPDIF through the toggle switch.
13. AC830 working while charging: When need to use the
AC830 for long time, due to the limited built-in battery usage
time, it allowed to connect the charging power supply (DC 5V
?300mA, when the battery is low or when the power supply of
poor quality may cause the current sound appears); Note:it is
not recommend to use this function while charging , otherwise
it may affect battery life.
WORKING IN TRANSMITTER MODE
1. AC830 and stereo Bluetooth headphone or Bluetooth
speaker (A2DP enabled) work on the TV A. Make the
Bluetooth speaker or Bluetooth headset in pairing mode.
B. Press MFB around 3 seconds until Blue LED flashes quickly
to enter into searing mode, if AC830 does not enter into pairing
mode, press double click MFB ( keep the operation consistently
) to enter into pairing mode.
C. Put the AC830 and Bluetooth speaker or Bluetooth headset
together, around 30s seconds later, BTI-029 will connect with
Bluetooth speaker or Bluetooth headset automatically
D. Connect the AC830 and TV with 3.5mm audio cable or fiber
optic cable.
E. It could hear the sound coming from TV in the Bluetooth
headset or Bluetooth speaker. If no sound from the Bluetooth
speaker or Bluetooth headset, please check the aux output or
fiber optic output setting on TV , the volume of the TV is loud
enough, the cable connects right or not. Use your finger to
touch the DC part of the audio cable that connected with
AC830 to check if the audio source has problems. When the
08 I
connection is successful and the volume of headset or speaker
is big enough, you will hear a zi, zi sound, it means AC830 and
Bluetooth speaker or Bluetooth headphone and cables are ok,
the problem may be on the audio source (TV).
2. AC830 and Bluetooth headset or Bluetooth speaker
(which must support A2DP) work together on the computer.
A. Make the Bluetooth speaker or headset in pairing mode.
B. Press MFB around 3 sec. until Blue LED flashes quickly to
enter into pairing mode, if AC830 does not enter into pairing
mode, double click MFB ( keep the action consistently ) to enter
into pairing mode.
C. Put the AC830 and Bluetooth speaker or Bluetooth
headphone together, around 30 sec. later, AC830 will connect
with Bluetooth speaker or Bluetooth headphone automatically.
D. Connect the AC830 and computer with 3.5mm audio cable
or fiber optic cable.
E. It could hear the sound coming from computer in the
Bluetooth headset or Bluetooth speaker. If no sound in the
Bluetooth speaker or Bluetooth headset, please check the aux
output setting on computer is the headset output or fiber optic
output, the volume of the computer is loud enough, the cable
connects right or not. Use your hands to touch the plug of the
audio cable for AC830 to check if the audio source has
problems. When the connection is successful and the volume
of headset or speaker is big enough, you will hear a "zi,zi"
sound, it means AC830 and Bluetooth speaker or Bluetooth
headphone and cables are ok, the problem may be on the
computer. Note: Pass code for supported Bluetooth headset,
Bluetooth receiver, Bluetooth speaker etc. is 0000, 1234, 1111,
8888.
I 09