▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Cordless lamp
Generation
Serial no.
1.5 Declaration of conformity
We declare, on our sole responsibility, that the product described here
complies with the applicable directives and standards.
declaration of conformity can be found at the end of this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916
Kaufering, Germany
2
Safety
2.1 Important safety instructions
WARNING! READ ALL INSTRUCTIONS. Failure to follow all instructions
listed below can result in electric shock, fire and/or serious injury. KEEP
THESE INSTRUCTIONS IN A HANDY YET SECURE PLACE.
2.2 Careful handling and use
▶ Use the product only when it is in perfect working order.
▶ Never tamper with or modify the product in any way.
▶ This device can be used by children 8 years of age or older and by persons
with physical, sensory or mental disabilities or little relevant experience
or know-how if they are supervised or have received instruction on the
safe use of the device and the resulting hazards.
▶ Do not use the product where there is a risk of fire or explosion.
▶ Do not use the device outdoors.
▶ Do not use accessories not specifically intended and recommended for
this power tool by the tool manufacturer. The fact that an accessory can
be attached to your power tool does not necessarily mean that it can be
used in safety.
▶ Replace the complete cordless lamp when the light source has reached
the end of its life. The light source in this cordless lamp is not replaceable.
▶ Do not look into the beam and do not direct the beam toward other
persons.
▶ Do not expose the device to rain or moisture. Water entering an electric
device will increase the risk of electric shock.
*2171355*
SL2-A12 | SL2-A22
01
2171355
A copy of the
English
13