Hilti SL 2-A12 Manual Del Usuario página 19

Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes.
If the LEDs of the charge state indicator flash, follow the instructions in
the 'Troubleshooting' section.
3.4 3-mode switch
Use the 3-mode switch to set the brightness.
Status
Press once
Press twice
Press three times
3.5 Items supplied
Cordless lamp, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Technical data
SL 2-A12
Voltage 10.8 V
Bright- 500 lm
ness
Weight 0.65 kg
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
*2171355*
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %
Meaning
The lamp lights with maximum
brightness.
The lamp lights with medium bright-
ness.
The lamp is off.
2171355
SL 2-A22
21.6 V
500 lm
1.3 kg
10.8 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
English 15