Publicidad
Idiomas disponibles
Idiomas disponibles
Top nozzle
1. Check whether
the nozzle holes are
clogged
by food particles.
2.
If cleaning
is needed,
remove the nozzle.
3. To remove the nozzle, pull out the upper
rack first, unfasten the nozzle cap by turning
it counterclockwise,
and then remove the
upper nozzle.
4. Clean the nozzle, re-insert it, and then
fasten the nozzle cap to the nozzle by
turning the cap clockwise.
5. Check whether
the nozzle is engaged
correctly
by rotating it by hand.
I
.s<_._ ,, {
""_ :
nozzle
CLEANING
THE FILTER
1.
Remove the lower rack first.
2.
Rotate the filter handle counterclockwise
to unfasten the filter
compartment
door.
3.
Remove the filter door, and then the
flat micro filter underneath.
4°
Remove any dirt or other remains
from the micro filter and the filter door,
and then rinse them under running
water.
Filter
with
handle
Flat micro
filter
5.
Re-install the flat micro filter, and then the filter door.
6.
Rotate the filter door handle clockwise
to lock the filter door.
[_
Once
month, clean the filter for better washing
performance.
a
If the filter door does not close properly,
cleaning
performance
will be decreased.
CAUTION
STORING YOUR DISHWASHER
If you need to store your dishwasher
for an extended
period of time, first drain and disconnect
it. If you
leave water in the hoses and internal components,
you can damage the dishwasher.
After draining and disconnecting
the dishwasher,
be sure to turn off the water
supply valve and circuit
breaker.
English o 23
I
D1,*TSOH9950
00149A
04
EN
141224indd
S_,c5:23
Publicidad
