Philips GC7933 Manual Del Usuario página 8

English
10
Problem
Dirty water and impurities
come out of the soleplate.
Water flushes out of the
soleplate.
The Calc-Clean process
does not start.
Possible cause
Impurities or chemicals present
in the water have deposited
in the steam vents and/or
soleplate.
You have accidentally started
the Calc-Clean process
(see chapter 'Cleaning and
maintenance').
You have not pressed the CALC-
CLEAN button for 2 seconds
until the appliance started
beeping.
Solution
Perform the Calc-Clean process regularly
(see chapter 'Cleaning and maintenance').
Switch off the appliance. Then switch it
back on again. Let the iron heat up until
the 'iron ready' light lights up steadily.
See chapter 'Cleaning and maintenance'.