Publicidad
Idiomas disponibles
Idiomas disponibles
Ifthe DVD player does n ot p erform properly when o perated
asinstructed
inthis Operating
Instruction,
check the player, con-
sulting the following
checklist.
Problem
No power
No sound or picture
Distorted picture
Completely
distorted picture or
black/white
picture with DVD
No sound or distorted sound
No audio at digital output
No DTS audio output
Picture freezes momentarily
during playback
Disc can't be played
No return to start-up screen when
disc is removed
The player does not respond to
the remote control
Buttons do not work or player stops
responding
Player does not respond to some
operating commands
during playback
DVD player cannot read
CDs/DVDs
Angle does not switch
Playback does not start when the title is selected
The password for rating level has been forgotten
Solution
-Check
if the AC power cord is properly connected.
-Unplug
the outlet once, and wait for 5-10seconds
and then plug it in
again
-Check
if the TV is switched on.
-Check
the video connection
-Check
the VIDEO/AUDIO
cable connections
to the TV
(See Connecting to a TV)
-Check if the INTERLACE/PROGRESSIVE
mode is set correctly accord-
ing to your T_ See page 23.
-Sometimes
a small amount of picture distortion
may appear.
This is not a malfunction.
-Connect
the player directly to the TV.
-Connect
DVD player directly to the TV.
-Make
sure the disc is compatible with the DVD player.
-Adjust
the volume.
-Check
that the speakers are connected correctly.
-Check
the digital connections.
-Check
if the audio format of the selected audio language matches
your receiver capabilities.
-Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.
-Check
the disc for fingerprints/scratches
and
clean with a soft cloth wiping from center to edge.
-Clean
the disc
-Clean
the disc
-Ensure
the disc label is facing up.
-Check
if the disc is defective by trying another disc.
-Cancel
the parental lock or change the control level.
-Insert
a correct disc that plays on this player.
-Reset
the player by switching the player off, then on again.
-Aim the remote control directly at the sensor on the front of the player.
-Reduce
the distance to the player.
-Replace
the batteries in the remote control.
-Reqnsert
the batteries with their polarities (+/- signs) as indicated.
-To completely
reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
-Operations
may not be permitted by the disc.
Refer to the instructions
of the disc.
-Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD player for repair.
-The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded
for specific scenes.
-Check
the "RATINGS" setting.
-Enter the default password "4737", then your forgotten password
will be cleared
NOTES:
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating
Instruction for details on correct operations.
•
Playback from a desired track and random playback are not available during program playback.
•
Some functions are prohibited on some discs.
- 26 -
EN
Publicidad
