Tena SmartCare Change Indicator Instrucciones De Uso página 10

en
SET UP THE GATEWAY
NOTE
The gateway should be placed within 33 ft/ 10 m of the Change Indicator
and connected to an electrical power outlet.
Placement
33 ft/ 10 m
3
Blinking light Steady light
You can also place the gateway
= connecting = connected
on a flat surface
Light
See page 23
Gateway lights
& buttons
4
No light
= OK
10
TENA SmartCare Change Indicator
1
Screws or
adhesive strip
2
Removal of the item: Grab
removal tab and slowly slide
the tab straight down against
the wall stretching the tape
at least 6 inches (15cm) until
item releases from the wall
TM/MC
Click!
5