INSTALLATION
3 INSTALLATION
3.1 SAFETY SUMMARY
!
D A N G E R
•
Read carefully this manual before performing the installation work.
•
Do not install this device in places accessible to the general public. Install it in electrical enclosures, which are only accessible by the
usage of a tool and also provide protection to eventual electromagnetic disturbances.
•
Do not connect power supply before the device installation is correctly done. Always disconnect power supply from the device before
any maintenance or servicing action.
!
C A U T I O N
•
This appliance must be used only by adult and capable people, having received the technical information or instructions to handle properly and
safely this appliance.
•
This is a Class A product. In a domestic environment this product may cause radio interferences in which case the user may be required to take
adequate measures.
•
Children should be supervised to ensure that they do not play with the appliance.
•
Check to ensure that the field supplied electrical components (mains power switches, circuit breakers, wires, connectors and wire terminals) have
been properly selected according to the electrical data indicated on this document and they comply with national and local codes. If it is necessary,
contact with your local authority in regards to standards, rules, regulations, etc.
•
Do not install Network / Modbus gateways in places:
- where any vapor, oil or other dispersed liquids could affect the device.
- where accumulation, generation or leaks of inflammable gases has been detected.
- near to any heat sources or electromagnetic noise sources.
- that they are near to the sea, in saline, acid or alkaline surroundings.
3.2 FACTORY-SUPPLIED COMPONENTS
Gateway device
1x
3.3 DIMENSIONAL DATA
3
PMML0351A rev.4 - 04/2020
Instruction manual
1x
USB Pen Drive Memory
1x