Keystone KSTAD504F Manual De Usuario página 18

plastic cover
1
Remove the plastic cover
by couter-clockwise rotation.
When you remove the plastic cover, if there is some water in the back drain outlet of the unit you must dry it. Make sure the hose is
secure so there are no leaks and the end of the hose is level or down to let the water flow smoothely.
Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing. Make sure the water hose is
lower than the drain hose outlet of the unit.
Select the desired humidity setting and fan speed on the unit for continuous draining to start.
When the continuous draining feature is not being used, remove the drain hose from the outlet, and dry the water in the
Note:
continuous drain hose outlet.
Pump drainage (Pump model only)
Water can be automatically emptied into a floor drain or a suitable drainage facility by attaching the pump drain outlet with a
pump drain hose(Φod=1/4", supplied).
Remove the continuous drain hose from the unit and install the plastic cover to the continuous drain hose outlet of the unit by
clockwise rotation.
Resert the pump drain hose into the pump drain hose outlet for depth of 15mm at least, then lead the water hose to the floor drain
or a suitable drainage facility.
Female threaded end
Drain hose
2
Install the Female threaded end
and connect the drain hose.
17
Type 3