Publicidad
Idiomas disponibles
Idiomas disponibles
USE INSTRUCTIONS
Detach Seat Cushion
1.Unfasten the snap on both sides of the seat cushion.
2. Before removing the cushion, please first unfasten the metal buckle on
both sides of the tube of the seat back and take out the plastic strap
buckle which stuck in the cushion front hole.
3. Adjust the backrest to the angle of lying flat, pull back both sides of
the cushion to make the fixed straps on both sides of the seat cushion
slide back out from the armrest slot and then the whole cushion can be
removed.
Because the seat is hollow structure composed of pipe fittings, please do
not use after removing the cushion to keep children from falling.
16
WARNING
MAINTENANCE SERVICE
Product Maintenance
1.Before each use, please check whether the various components
(Screws and rivets) are firm and intact and whether the parts or seat
cushion are damaged. Check and repair regularly. For your baby's safety,
please stop using if there is any abnormality.
2.Avoid using or storing in damp, cold or high temperature environment
for a long time, otherwise it will easily lead to parts rusting and aging,
affecting the service life of the product or causing danger.
3.Clean the seat cushion: wash it with warm water and dry it after hand
washing. Do not over expose to the sun.
4.Do not use bleach when cleaning the highchair frame. Please avoid the
hardware parts from contacting water to avoid rusting and affecting the
service life of the product.
5.Check the highchair frequently. If there is any problem, please repair it
in time.
6.Each rotating part (such as wheels, joint rotation button, etc.) shall not
be lubricated with viscous oil to prevent the lubricating oil from attaching
debris to affect the rotation.
EN
17
Publicidad
