Publicidad
Idiomas disponibles
Idiomas disponibles
1
XLR Output L/R Jacks: Balanced stereo main outputs.
2
GND/LIFT Switch: For controlling whether the XLR balanced output is grounded.
3
USB-C Jack: USB Type C connector for connecting to the computer for USB audio, tone
editing, backups, firmware upgrades, and IRs import.
4
Headphone Jack: 1/8" stereo output interface for connecting the headphone.
5
AUX IN Jack: 1/8" stereo external audio input connector.
6
EXP2 External Pedal Jack: Connect an external expression pedal with a 1/4" stereo
TRS cable or a dual-footswitch pedal.
7
Output L/R Jacks: 1/4" TS unbalanced stereo outputs. To use mono signal, just plug in
the L output.
8
Input Jack: 1/4" TS mono high impedance input for guitar/bass.
9
MIDI IN Jack: 5-pin MIDI IN input for receiving MIDI control messages.
10
Power Switch: Turn on/off the power.
11
DC IN Jack: Use a 9V DC regulated power adapter, 500mA
12
Tieline Buckle: Used to tie the power adapter to prevent the power cable from falling off.
13
Output Volume Knob: Control the volume of the 1/4" unbalanced outputs.
14
XLR Volume Knob: Control the volume of the XLR balanced outputs.
15
Parameter Knob 1-5: Used to adjust effect parameters.
16
LCD Display: 3.5-inch TFT color screen (320 X 480 pixels).
17
Value Knob: Pressable knob for navigating the menu and adjusting the parameters.
18
Button: "HOME" function. Pressing for return to the HOME screen (preset page).
19
Button: "BACK" function. For exiting the current operation or returning to the
previous menu.
20
Page Button: Used for effect modules to turn pages.
21
Store Button: Press the button for storing presets.
22
System Button: Press the button to enter the system menu for
global setups.
23
Effect Blocks Button: Turn On/Off the effect blocks, or enter the
blocks for effect editing.
24
Drum Button: Press the button to enter the drum machine interface.
25
EXP Button: Press the button to set the expression pedal functions
(EXP1/EXP2).
26
Tuner Button: Press the button to enter the tuner interface.
27
Loop Button: Press the button to enter the looper interface.
28
CTRL Button: Press the button to set the CTRL footswitch functions.
29
Output Button: Press the button to set if Cab Sim effect is assigned
to XLR and 1/4" outputs.
30
Headphone Volume Knob: Control the volume of the headphone
output.
31
Footswitch A: With RGB light circle, corresponding to the function
indicated in the screen. Default is to switch the preset of group A in
this Bank.
32
Footswitch B: With RGB light circle, corresponding to the function
indicated in the screen. Default is to switch the preset of group B in
this Bank.
33
Footswitch C: With RGB light circle, corresponding to the function
indicated in the screen. Default is to switch the preset of group C in
this Bank.
34
EXP Pedal: For controlling the defined parameters in real-time.
03
Publicidad
