Donner ARENA2000 Instrucciones De Uso página 9

Changing the Order of Effect Blocks of the Chain
ARENA2000 allows the user to change the order of the effect blocks in the chain.
Step 1: Press to return to the main screen, press the Value Knob and the preset name bar will change to blue
from green.
Step 2: Then rotate the Value Knob until a cursor appears above the effects chain, rotate the Value Knob to choose
the effect block which you want to move.
Step 3: Press the Value Knob to select it, then rotate the Value Knob to place the selected block in the new position.
Step 4: Finally, press the Value Knob again to confirm.
Preset Switching Mode and Control Mode
There are two modes of operation for ARENA2000 footswitches: Preset Switching Mode and Control Mode.
① The default is Preset Switching Mode when power on, in this mode, the currently selected preset footswitch will light up white. Step this footswitch to toggle between Preset
Switching Mode and Control Mode. The light of this footswitch will turn green in Control Mode. The other two footswitches will become Ctrl footswitches, which can be set as
any effect block switch, tuner switch, or TAP tempo switch.
② The control contents for the other two footswitches can be set by pressing the panel's CTRL button. (See CTRL and EXP settings for details) In Control Mode, press A/B
or B/C footswitch together can still switch the banks, and after the bank and preset are selected, it will automatically return to Preset Switching Mode.
Preset Switching Mode
Control Mode
CTRL, EXP1 and External EXP2 Pedal Setting
ARENA2000 allows users to customize the functions of the CTRL footswitch and EXP1/EXP2 pedals.
White
Press the current preset footswitch to switch mode
Long press the current preset footswitch to enter Tuner
Green
Ctrl B Ctrl C
06
Cursor
COMP FX A DRIVE AMP
EQ MG FX B DELAY
CAB
REVERB