Publicidad
Idiomas disponibles
Idiomas disponibles
26 OPERATION
heat setting of the cooking zone. If you try to use
Boost on two cooking zones in the same group,
the selected cooking zone displays a flashing
and the power level is automatically set to 9
G
rather than Boost.
For safety, after 6 minutes the Boost setting will
automatically revert to power level 9.
Left Cooking Zones
a
Right Cooking Zones
b
Turning Boost On
Place the cookware on a cooking zone. Select the
cooking zone and press the Boost button.
WARNING
• Never use the Boost mode to preheat empty
cookware or to heat oil, butter or lard. The
cookware may be damaged and the fat or
grease may catch fire if overheated.
NOTE
• Under certain conditions, the Boost function will
turn off automatically to protect electronic
elements inside the cooktop.
• This can occur if the product is used for long
periods, when frying, or if cookware is lifted or
moved in the Boost mode.
and
b
Other Functions
Pause
The Pause function reduces the power level of all
active cooking zones to level 1 and maintains them
at that level until deactivated. To use the pause
function, press the Pause button. To turn off the
pause function, press Pause again to return the
cooking zone to the previous power level.
Timer
The Timer acts as a simple timer and does not turn
off the cooking zone. It is not tied to any specific
cooking zone. When the set time has passed, the
timer sounds an alert. If the cooking zone is turned
off during timer operation, the timer will continue
to operate.
1
Press the Timer button and
display.
2
Use the Power Level button to set the desired
amount of time. After 3 seconds, the timer will
start.
• Timer can be adjusted from 0 to 99 minutes.
• If no time is entered for 25 seconds, the
timer will turn off.
flashes in the
OO
Publicidad
