Descargar Imprimir esta página

NUTRIBULLET PRO+1200 NB-207 Guia Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not allow the cord to hang
over the edge of the table or
counter. Do not pull, twist, or
damage the power cord. Do
not allow cord to touch hot
surfaces, including the stove.
If the motor stops working,
unplug the motor base and
let it cool for an hour before
attempting to use it again. Your
nutribullet
has an internal
®
thermal breaker that shuts off
the motor when it overheats.
The thermal breaker will reset
when the unit is unplugged
and the thermal breaker cools
down sufficiently.
CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and off by the utility.
VENTILATION
To prevent a fire hazard,
the openings on the bottom
of the motor base should
be free of dust or lint and
never obstructed as they
are provided for ventilation
to ensure reliable motor
operation to prevent over
heating. Never place your
nutribullet
on top of
®
flammable materials such
as newspapers, tablecloths,
napkins, dishtowels, place
mats or other similar type
of materials.
6
• CAUTION!
Always operate the
nutribullet
on a level surface,
®
leaving unobstructed space
beneath and around the
motor base to permit proper
air circulation. Slots on the
bottom of the motor base are
provided for ventilation to
ensure reliable operation and
to prevent motor overheating.
MICROWAVE & STOVE-
TOP HEATING SAFET Y
• DO NOT BLEND HOT
INGREDIENTS!
After blending
room temperature or cooler
ingredients (21°C/70°F or
less), transfer mixture to an
unsealed, microwave-safe
container or to a stove-top
pot to heat. Always use a
thermometer to test the
internal temperature of cooked
ingredients, they may feel cool
to the touch, but still be hot
inside.
• Caution must be observed if
hot liquid is poured into the
product (food processor or
blender) as it can be ejected
out of the appliance due to a
sudden steaming.
Do not place any of the
nutribullet
parts in a
®
microwave, oven or stove-top
pot or immerse in boiling water
as this may result in damage
to the accessory.
Avoid blending the following
seeds and pits in the
nutribullet
, as they contain a
®
chemical known to release
cyanide into the body when
ingested: apple seeds, cherry
pits, plum pits, peach pits, and
apricot pits. Fruit pits may also
cause damage to the blade
and cup.
MEDICAL SAFET Y
• The information contained in
this user guide is not meant
to replace the advice of your
physician. Always consult your
physician regarding health
and nutrition concerns.
MEDICATION INTERACTIONS:
If you are taking any
medication, especially
cholesterol lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please check
with your physician before
trying any of the smoothie
recipes contained in the
Recipe Guide.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
• TO AVOID LEAKAGE, DO
NOT OVERFILL THE CUP!
Make sure ingredients and
liquid do not exceed the MAX
line. The cyclonic action
®
of the nutribullet
requires
®
space to extract effectively
and exceeding the MAX line
can result in leakage and
may create a dangerous
pressurization which can
cause the vessel and blade
assembly to separate.
Cup and Extractor Blades
are specific to the exact
model of nutribullet
. Use of
®
incompatible parts (parts
from other models) may result
in damage to your nutribullet
or create safety hazards.
When replacing cups or an
extractor blade or ordering
additional accessories from
nutribullet.mx, or by
contacting Customer Service,
please specify the model for
parts that are compatible
with your unit.
• Periodically inspect all
nutribullet
components
®
for damage or wear that
may impair proper function
or present an electrical
hazard. Make sure that the
power cord and plug are
undamaged. Discontinue use
and replace blending vessels
if you detect cracking,
cloudiness, or other damage
to the vessel, tabs on the
vessel or actuator tabs of the
motor base. Ensure that the
blades rotate freely and that
the structure is undamaged.
Make sure that the motor
base is unobstructed and
clean. Follow maintenance
recommended in pages 14
and 15 and never operate
your nutribullet
with
®
damaged components.
If your nutribullet
®
®
7

Publicidad

loading