Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly guide.
nutribullet
cup
®
extractor blade
motor base
10
PULSE
nutribullet
assembly.
1
2
Add ingredients* to
Place the Extractor
the nutribullet
Cup.
Blade onto the
®
nutribullet
and twist until it is
tightly sealed.
4
5
Unlock the
Once the Extractor
assembly by gently
Blade stops
pushing and
completely, remove
untwisting the cup
the nutribullet
counterclockwise.
Cup from the
Motor Base. Enjoy!
cup
®
SEE USER GUIDE FOR DETAILED
ASSEMBLY INSTRUCTIONS.
3
Turn the nutribullet
Cup upside down and
place it onto the Motor
Base. Gently push and
Cup
®
twist, 60-second auto
blending cycle will be
activated. The blue
light and unit will shut
off once auto-mode
is completed.
CAUTION: Do not run the
Motor Base in excess of 1
minute per interval. Do not
run the Motor Base for more
than three 1-minute intervals
without allowing it to cool
for 2-3 minutes after the
third extraction. Running the
motor for more than 1 minute
consecutively in any interval
may warm the ingredients and
pressurize the nutribullet
®
Friction from the rotating
Extractor Blade when
extracting can cause
ingredients to heat and
generate internal pressure in
the sealed vessel. If the vessel
is warm to touch, allow to
cool before carefully opening
pointed away from your body.
®
Cup.
®
11
Publicidad
