Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PROBLEM DIAGNOSIS AND SOLUTION
Symptom
Offline (NO WIFI logo)
Connected (WIFI logo) but no
communication
LED AND DIAGNOSTIC INDICATORS
LED
POWER
WIFI LINK
E.O.L.
CAN1
BYP1
CAN2
BYP2
8
105 294 R. 05/23
Possible cause
WIFI network down or SSID/PAS-
SWORD misconfigured.
Wiring problem
Configuration problem
DESCRIPTION
Shows that the equipment is connected
Shows that the equipment has WIFI conection
If it lights up, it means that the end of line resistor is activated
If it lights up, it means that the CANBUS 1 network is online.
If it lights up, it means that the CANBUS 1 network has a comunication problem and the
solenoid valves are opened to allow dispensing in an emergency.
If it lights up, it means that the CANBUS 2 network is online.
If it lights up, it means that the CANBUS 2 network has a comunication problem and the
solenoid valves are opened to allow dispensing in an emergency.
Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com
Solution
Check WIFI network and configuration
parameters.
Check wiring
Check configuration
Publicidad
