Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE USING FOR THE FIRST TIME
1. Remove any packaging materials from the appliance.
2. Clean the grill rack and its accessories.
3. The barbecue assembly:
a) Use two screws joint the grill body and the control seat. Note: the plastic pole must be upturned. Insert the
heating element into the grill rack (as the chart)
b) Place the heating element with the grill rack into the grill pan. Insert the control box into the grill pan. Guarantee
the plastic pole of the grill pan insert the hole under the control box, and assemble right.
c)
Place the grill on the table. Ensure that the grill is placed in a safe and stable position. The power cord should
be placed suitably in order that no one is likely to trip over it.
d) Let the grill heat up for a moment without any food on the rack. This will reduce the smell when first switching
on a new grill (a slight smell and a little smoke may be emitted-ensure sufficient ventilation).
USE OF THE GRILL
1. Fix the heating element; then ensure that the grill rack is placed correctly on the element.
2. Insert the plug into the mains supply socket.
3. Then you place the food stuffs on the grill rack.
4. When grilling is finished, disconnect the grill from the mains supply socket.
5. If you want to cook foods that need to be tossing and turning during cooking, you can use the supplied double grid
when placed over the heating element.
6.
Always use a glove to handle the double cooking grill and allow to cool before handling and cleaning.
GENERAL CARE AND CLEANING
Ensure that the grill is thoroughly cleaned after use.
Before cleaning your barbecue, always make sure that the plug has been disconnected from the mains supply socket.
Allow the grill to cool down thoroughly before cleaning.
Then you should remove the heating element and control box from the gill pan. Never switch the heating element on
when it is not placed onto the appliance.
Clean the heating element with a clean and dry cloth only.
Clean the grill rack and the grill pan with warm soapy water and dry afterwards.
Don't use harsh abrasive cleanser or a metal sponge to clean the grill rack and the grill pan.
STORAGE
After cleaning, the grill should be stored indoors in a dry location.
1 Heating element
2 Control box
3 Grill rack
7
4 Handle
5 Grill pan
6 Control seat
7 Double grill
9
Publicidad
