Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 FUNCIONES
Display
When the refrigerator is powered on for the first time, the entire panel will light up for
3 seconds and then the normal status will be displayed, with the default temperature
of 5ºC/-18ºC respectively. If an error occurs, the display will show the corresponding
error code (see table on next page). During normal operation, the display panel shows
the set point temperature of the refrigerator and freezer. If no operation is performed
and the door is not opened within 30 seconds, the display panel will lock, and after
another 30 seconds, the display will turn off.
Lock/Unlock
In the unlocked state, press and hold the Vacation button for 3 seconds to activate the
lock. The lock icon will light up and the unit will emit an acoustic signal to indicate that
the lock mode is active and the use of the buttons is disabled.
In the locked state, press and hold the Vacation button for 3 seconds to deactivate the
lock. The lock icon will turn off and the unit will beep to indicate that the lock mode is
inactive and the use of the buttons is enabled.
Temperature setting of refrigerating chamber
Press the Fridge button to change the set temperature of the refrigerator. With each
press of the button the temperature will be reduced by 1ºC. The refrigerator
temperature setting range is from 2 to 8ºC. When set to 2ºC, pressing the button again
will change it directly to 8ºC.
(The picture above is only for reference. The
actual configuration will depend on the physical
product or statement by the distributor)
Display screen
1. Refrigerating chamber temperature
display area
2. Freezing chamber temperature display
area
3. InstantCool icon
4. InstantFreeze icon
5. Vacation icon
6. Lock icon
Operation button
A. Temperature setting button of
refrigerating chamber
B. Temperature setting button of
freezing chamber
C. Vacation/Lock button
15
V.2
Publicidad
