5. SD card installation (not included)
-Insert the memory card before installing the batteries.
-Memory cards up to 8 GB are supported.
-To insert the card, slide down the metal cover (OPEN).
-Open it carefully and insert the card. Close the cover and lift it upwards
to secure it (LOCK).
-In case the card is not readable, format it in FAT 32 from a computer.
5.1 Image saving selection
-By default, photos are stored in the internal memory of the peephole
(capacity=26 photos).
-From the setting menu, you can select where to save the images, ei-
ther to the internal memory or to the 512 Mb SD card (NOT included).
-To do so, select
floppy disk icon, press
and hold down
5.2 System settings
-In normal mode, press
-You should now find yourself on the configuration mode page.
-Press
to search for different configurations.
24
the settings menu and press until you get to the
to select peephole or card, and then press
until you exit to the main screen.
to enter the configuration mode.
Time - Date - Ringtone - Volume
- Auto power off time - Save file in
EN