ARDES AR4C04 Folleto De Instrucciones página 13

SUPPORT ASSEMBLY
Turn the appliance over, rest the plastic supports (5) in place matching
the holes with those on the appliance. Then fix the supports with the 4
screws provided.
The appliance can emit
appliance setting.
Before connecting or disconnecting the appliance, make sure that
function switch (3) and Turbo function pushbutton (2) are in the OFF
position.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch (3) in the desired position and turn the thermostat (4)
clockwise to the maximum position.
To activate Turbo Function push the button (2) on the appliance: it will
help to spread the heat faster. To deactivate Turbo Function push again
this button.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Instructions for use
both cool air as well as hot air, depending on the
Maintenance
GB
GB
13