Descargar Imprimir esta página

Makita HR010G Manual De Instrucciones página 2

Ocultar thumbs Ver también para HR010G:

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Capacities
No load speed
Blows per minute
Overall length (with BL4025)
Rated voltage
Net weight
Optional accessory
Model:
Suction performance
Operating stroke
Suitable drill bit
Net weight
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
The cord connected power source(s) listed above may not be available depending on your region of residence.
Before using the cord connected power source, read instruction and cautionary markings on them.
Concrete
Core bit
Diamond core bit (dry type)
Steel
Wood
D.C. 36 V - 40 V max
2.8 - 4.5 kg (6.2 - 9.9 lbs)
0.24 m
Up to 105 mm (4-1/8")
Up to 165 mm (6-1/2")
BL4020* / BL4025* / BL4040* / BL4050F / BL4080F
* : Recommended battery
DC40RA / DC40RB / DC40RC
2 ENGLISH
HR010G
20 mm (13/16")
35 mm (1-3/8")
32 mm (1-1/4")
13 mm (1/2")
26 mm (1")
0 - 1,350 /min
0 - 5,000 /min
289 mm (11-3/8")
DX16
3
/min (8.5 cu.ft./min)
0.77 kg (1.7 lbs)
PDC01 / PDC1200

Publicidad

loading