Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USE
1.
Ensure the soup maker is unplugged before adding the ingredients.
2.
Remove the lid. Be careful not to touch the blade.
3.
Place all the ingredients in the soup maker.
4.
Add the water or broth last, filling it up to between the min and max indication lines. Make sure that
the appliance is always filled between the minimum (1200 ml) and maximum (2200 ml) indicators.
5.
Place the lid back onto the jug. Ensure it is securely in place.
6.
Plug the cable in the power socket at the bottom of the handle. The indicator lights will blink one by
one.
7.
Select the required program (juice, jam, extra smooth, soy/nut milk, smooth, chunky, blend/clean)
by pressing the setting button 'SELECT'. Confirm with the start button 'START/STOP'.
! Attention: the jug will heat up.
8.
When the programme is finished, a signal will sound for one minute. After one minute, the appliance
will turn itself off automatically. Be careful when you pour out the soup!
! Caution: if you want to turn the appliance off during the programme or want to change the
programme, press and hold the on/off button for a few seconds.
! Do not use the appliance without ingredients.
MEMORY FUNCTION
If you have forgotten to add an ingredient, you can still do this while the appliance is running by just
removing the lid from the appliance. The soup maker will remember the current programme for 2
minutes. Add the forgotten ingredients and replace the lid. The programme will continue.
www.domo-elektro.be
31
DO716BL
Publicidad
Tabla de contenido
