Cleaning And Maintenance; Problems And Solutions; Frequently Asked Questions - Linea 2000 DOMO DO716BL Manual De Instrucciones

CLEANING AND MAINTENANCE

! Do not place the appliance in the dishwasher.
·
! Do not immerse the appliance in water.
·
· Remove the lid and clean with a damp cloth.
· Be careful when cleaning the blade.
· Fill the jug with warm water and a little bit of soap. Clean your appliance with the
blend function (see the section on use). Clean the inside of the jug with a soft sponge.
Do not use a scouring pad as this will scratch the base.
· After cleaning, dry all parts thoroughly.

PROBLEMS AND SOLUTIONS

Problem
The lights on the display
are off
The light of the chosen
setting is on, but the
appliance doesn't work
The appliance stops
working
You can hear several beeps
and the light of the chosen
program blinks
The error message 'E1'
appears on the display.
The food is burned

FREQUENTLY ASKED QUESTIONS

Can I make cold soups like Gazpacho in my soup maker?
Yes. First cook the soup using the chunky or smooth setting. Then simply let the soup cool or refrigerate.
The soup maker stops working
The appliance has a safety thermostat. When the appliance is overheated it stops working. This can
happen when you use the soup maker multiple times in a row. If this problem occurs, remove the food and
allow the appliance to cool for half an hour. It should now work correctly.
www.domo-elektro.be
Causse
There is a problem with the
connection
There are too many ingredients
in the jug, the lid is not in place
You didn't confirm the setting
with the start button
There is not enough liquid in
the jug
There is too much liquid in the
appliance
The overfill sensor is dirty
There is too much liquid in the
appliance
The overfill sensor is dirty
The jug wasn't filled between
the min and max indication
lines.
Solution
Check if the power cord is properly
connected
Remove some of the ingredients.
Ensure the lid is in place
Press the start button
The appliance has a boil dry
protection. The appliance will shut
down when there is not enough liquid
used
The appliance has sensor to make
sure it doesn't overflow. Pour some of
the liquid from the jug.
Clean the sensor with a damp cloth
The appliance has sensor to make
sure it doesn't overflow. Pour some of
the liquid from the jug.
Clean the sensor with a damp cloth
Ensure the base is always covered
with liquid, between the min and max
indication.
33
DO716BL