Sandrigarden SG 26 Manual De Instrucciones página 15

3
1
2
Fig.12
HEDGETRIMMER OPERATING MANUAL
Fig.11
1
4
2
3
Fig.13
12) Press the throttle contol lever briefly (fig. 11
item3) and the throttle lock button will disengage
automatically. The engine will thus return to idle
and the line head will stop after a short while.
STOP ENGINE
1) To stop the engine, shut the power switch (fig.
11 part. 1) "STOP
CAUTION! Familiarise yourself with the
operation of the throttle lock in order to
act quickly in case of an emergency.
CAUTION! The blades continue to move
for a while after the throttle lever is re-
leased.
WARM ENGINE STARTUP
Follow the instruction given for cold engine
startup, but with the choke lever in position
7. OPERATION
Always grip the machine with both hands.
Operate by opening the throttle lever to
maximum.
CUTTING THE TOP OF THE HEDGE
A) Keep the machine in a horizontal position
(fig. 3).
B) The rear handle in a vertical position.
C) For safety reasons, do not use the machine
above shoulder height.
CUTTING THE SIDES OF THE HEDGE
A) For a vertical cut, move the rear handle into
a comfortable position for the hand and arm.
Hold the front handle with the side grip (see fig. 4)
GB
".
.
15