Publicidad
Idiomas disponibles
Idiomas disponibles
6. Wall Mounting the Enclosure
1. Mount the Enclosure to Wall Studs
Do not attempt to mount the enclosure to the wall with equipment in the enclosure.
The supporting surface must be able to safely support the combined load of the equipment
and all attached hardware and components. For the actual weight, size and load capacity of
the enclosure, view the product specifications and other support resources at
The number of hole cutouts on the back door of the enclosure will vary based on your model. Each hole can accommodate
an M8, M10, 5/16" or 3/8" bolt. The holes are centered 16 inches apart horizontally to accommodate the standard
placement of wall studs. The vertical distance between the holes will vary based on your model.
Rear View
Warning: Never attempt to lift or install without adequate help.
Do not try lifting the enclosure alone.
tripplite.com/support.
IMPORTANT!
Find a wood stud
location for mounting
the enclosure
7
Mark the exact
location of the
mounting holes
Drill pilot holes
(Mounting
Hardware Not
Included)
Attach the
enclosure onto
the wall
Publicidad
