Step 8 - Complete Installation - Haier HLP21N Manual Del Usuario

STEP 8 - COMPLETE INSTALLATION

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
1. Plug the washer into a grounded 3 prong outlet.
2. Check that water faucet is turned on.
3. Dispose of/recycle all packaging materials.
4. Check that the casters, if installed, are locked. See "Level
the Washer."
5. Run a normal wash cycle using detergent to test and
clean the washer. See the "Operating Instructions"
section.
20
WARNING
Electrical Shock Hazard