Descargar Imprimir esta página

LG WT4901CW Manual Del Propietário página 32

Ocultar thumbs Ver también para WT4901CW:

Publicidad

Idiomas disponibles

Idiomas disponibles

32
TROUBLESHOOTING
Normal
sounds you may hear
The following
sounds may be heard while the washer is operating, They are normal,
Clicking:
• Lid lock relay when the lid locks and unlocks,
• The washer will make a series of clicking noises as it changes the cleaning mode,
High pitched noise:
The wash basket spins faster to remove moisture from the load,
Spraying or hissing:
Water spraying or circulating during the cycle,
Humming or gurgling:
Drain pump pumping water from the washer at the end of a cycle,
Water sloshing sound:
A liquid in the balance ring around the wash basket he_ps the basket spin smoothly.
(Washer is turned off and tub is rotated,)
Sound of water being added after the ,washer has already been operating:
• The washer adapts to the load size and type to add more water to the cycle as needed.
• The wash load may be unbalanced
If the washer senses that the load is unbalanced, it will stop and refill to redistribute
the
load
- The washer may be diluting laundry additives to add to the wash load,
Before
calling
for service
Your washing machine is equipped with an automatic error--monitoring system to detect and diagnose probtems at an early stage.
If your washer does not function properly or does not function at all, check the following
before you call for service.
Possible _u:s_
'
Solutions
Railing
and clanking
- Foreign obiects, such as keys, coins, or
noise
safety pins, may be in drum or pump
Thumping sound
Vibrating noise
Water leaking around
washer
Excessive sudsing
• Heavy wash loads may produce a thumping
sound.
• Washer load may be out of balance.
• Wash load may be unevenly distributed
in
the drum
° Not all leveling feet are resting firmly on
the floor
- Floor not rigid enough.
• Fill hose connection
is loose at tap or
washer.
• House drain pipes are clogged.
- Large items such as pillow and blanket
over the tub.
• Too much detergent or incorrect detergent,
• Stop washer and check drum for foreign obiects, if
noise continues after the washer is restarted, cail for
service,
• This is normal
If sound continues,
the washer is
probably out of balance. Stop and redistribute
the
wash load
, Sto_,p and redistribute
the wash load
° Stop washer and rearrange the wash toad.
e
t
Adjust the leveling feet. Make sure aHfour feet are in
firm contact with the floor while the washer is in the
spin cycle with a load.
Make sure that the floor is solid and does not flex.
Refer to Flooring in the Installation section.
Check hoses Check and tighten hose connections.
Unclog drain pipe, Contact a plumber if necessary,
Check the cycle If you wash large items, use BULKY/
BEDDING cycle.
Stop washer and check the load position. Lay bulky
items into the tub.
Reduce detergent amount or use low-sudsing
detergent,
Only use detergent with the HE
(High-Efficiency)
logo,

Publicidad

loading