GE 18 Serie Manual Del Propietario E Instalación página 20

Installation Instructions
REVERSING THE DOOR SWING
(CONT.)
[] REMOVE DOOR STOPS FROM
THE RIGHT
On each dooi; remove the metal door stop fl'om the
bottom right side of the dome. Place the door stops
and scre_:s aside tmfil the handles are transferred to
the right side of the dooi_.
.0 0
" 0c3 J
Right Side
[] TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
O Remove the two
scre_ holding the
handle to the top of
the dora:
O Slide the handle
up on the fi_stener and
remove the handle.
Remove the handle Threaded
fi_stener with the Plug
Phillip's screwdfiveI: Button
O Transfer the
fi_stener to the right
side and move the
threaded i_lug button
to the left side of the
refl_igerator dora; Fastener should be flush with the
dooi_DO NOT overtighten,
After removing the hmldle: Move the small i)lug
buttons fl'om the top right side of the door top and
insert them into the holes on the opposite side,
I Small P luq
Buttons
Move the large, l)hw,_ button fl'om the left edge of the
door and insert it into the hole on the opposite side.
Repeat this step on the bottom of the dora:
PlugButton
20
[]
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT (CONT.)
Reinstalling the hm_dle: Attnch the handle to the
right side of the
dora:
O Attach the handle
to the fl_stener and
slide it down into
position. O I,ine up
the handle with the
screw holes in the top
of the door and
tighten the screws,
j/
[]
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT
O Remove the two
scre_:s holding the
handle to the bottom
of the dooI: _ Slide
the handle down on
the fi_stener and
remove the handle.
Remove the handle
fastener with a Phillip's
screwdri_ ei: O Transfer
the fi_stener to the right side and move the GE badge
to the left side (ff the fi'eezer dora: Fastener should be
flush with the dom_DO NOT overtighten.
Move the lalge i)lug
Plug Button
button ti'om the left edge
of the door and insert it
into the hole on the
opposite side. Repeat this
step on the bottom of the I
dora:
RehlstaJlhlg the hm_dle: Attach the handle to the
right side of the doo_:
O Attach the handle
to the fastener and slide
it up into position.
O i,ine up the handle
with the screw holes in
the bottom of the door
and tighten the scre_:s.