Balance Adjustment - HumanTechnik tiviton BT Instrucciones De Manejo

Tone adjustment:
If necessary, the tone can be adjusted on the receiver in 4 levels by repeatedly pressing
the tone button:
1. Press once: Treble boost - The setting is indicated by one short beep.
2. Press twice: Treble and bass boost - The setting is indicated by two short beeps.
3. Press three times: Bass boost - The setting is indicated by three short beeps.
4. Press four times: Normal - The setting is indicated by one long beep.
The receiver saves the selected setting for the next use.

Balance adjustment:

The sound balance can be adjusted on the receiver if required. Turn the sound balance
control to the left or right in order to balance out the incoming audio signal.
Trouble shooting:
No sound:
- Make sure that the power supply is securely plugged into the outlet and that the power
supply cable is properly inserted into the DC input on the transmitter.
- Ensure the receiver is properly linked to the transmitter.
- The receiver battery may be low. Recharge the receiver.
- Make sure that the audio source is feeding a signal to the transmitter, check if the TV,
stereo set or other sound source is turned on.
- Check the volume setting.
- The connected audio source may not be in playback mode.
- Check which transmitter the receiver is connected to. Deactivate Bluetooth function on the
unnecessary Bluetooth device.
TivitonBT_DE-EN-FR-NL-ES.indd 25
English 25
29.11.2017 09:28:52