Descargar Imprimir esta página

MD SPORTS 14801 Instrucciones De Ensamblaje página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Lift the table assembly
from the floor with two strong adults, turn it over, and set table on its legs
in the location where you will play. Go back and make sure that all connections
are tight.
CABINET
DO NOT HOLD THE LEGS
HOLD TAB L__
i
J
DO NOT LEAN THE
TABLE ON ITS LEGS
Caution :
Two strong adults are recommended to turn the table over as shown.
1.Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
6. Attach the Goals (#5) to each end of the table using the Screws (#8) as shown in FIG 2. Affix the
Electronic
Scorer
(#10) to the Main Frame (#1) in the pre-drilled
holes using the Screws
(#14).
Extend the wires found under the main frame to the Electronic
Scorer
(#10) and connect
them in
appropriate
acceptors
as shown in FIG. 2A.
7. Plug in the power cord, and you are now ready to play.
14
5

Publicidad

loading