Descargar Imprimir esta página

GreenWorks WDV40L410 Manual Del Operador página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

9.1
START THE MACHINE
14
1. Push the on/off button (14) to turn the machine on.
WARNING
Hold the machine with hands during operation.
NOTE
If you want to start the machine again please wait until
the machine completely stops.
9.2
STOP THE MACHINE
1. Set the ON / OFF switch to the off position.
9.3
BLOWING FEATURE
16
15
The wet/dry vac can blow sawdust and other debris.
Complete the steps below to use your machine as a
blower.
1. Align either of the grooves (16) in the tube with the
tabs (15) on the hose.
2. Attach the desired accessory to the end of hose.
3. Start the machine.
English
9.4
OPERATION TIPS
The filter must always be in correct position to avoid
leaks and possible damage to the machine.
When you use your machine, it will be necessary
for you to empty the collection tank and clean the
filter at more frequent intervals to maintain peak vac
performance.
When the liquid in the collection tank reaches a
predetermined level, the float mechanism will rise
automatically to cut off air-flow. This will cause the
suction stop and the higher motor noise. When this
happens:
1. Turn off the machine.
2. Remove the battery pack.
3. Empty the collection tank.
Dry the filter after you use the machine to avoid
mildew and damage to the machine.
10
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
10.1 CLEAN THE FILTER
Allow the filter to dry before storing the machine or
picking up debris.
Clean the wet/dry vac filter frequently to maintain
optimal performance.
Cleaning a dry filter:
Cleaning should be done outdoors and not in the
living quarters.
You can use a small brush to clean the dust and
debris.
For thorough cleaning of dry filter with fine dust
(no debris), run water through it as described under
"Cleaning A Wet Filter"
Cleaning a wet filter:
1. Remove the filter from the machine.
9
CAUTION
CAUTION
WARNING
NOTE
EN

Publicidad

loading

Este manual también es adecuado para:

4707302