Publicidad
Idiomas disponibles
Idiomas disponibles
Do not expose power tools to rain or wet conditions. Water entering a
f
power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
f
unplugging the power tool. Keep cord away from heat, oil, sharp edges
and moving parts. Damaged or entangled cords increase the risk of electric
shock.
When operating a power tool outdoors, use an extension cord suitable
f
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is unavoidable, use a
f
residual current device (RCD) protected supply. Use of an RCD reduces the
risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when
f
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
f
Protective equipment such as dust mask, non-skid safety shoes, hard les
casques ou les protections acoustiques hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
f
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on.
f
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times. This
f
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
f
clothing and gloves away from moving parts.Loose clothes, jewellery or
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and
f
collection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool for your
f
application. The correct power tool will do the job better and safer at the
57
EN
Publicidad
