Descargar Imprimir esta página

Hydrofarm autopilot APC8400 Manual De Usuario página 3

Controlador digital de co2 con sensor integrado

Publicidad

Idiomas disponibles

Idiomas disponibles

1. CO
Trend Chart
2
2. AVG HI Reading of Chart
3. AVG LO Reading of Chart
4. Audible Alarm On/Off
5. Target Low Value
6. Target Hi Value
7. CO
Reading
2
8. Zoom Level of Time –
indicates the chart's
timespan
9. Target Zone Indicator
CO
/ SET TARGET HI / SET TARGET LOW
2
The device has three built-in main parameters: ambient carbon dioxide (7), Set Target Hi value (6),
and Set Target Low value (5). They are constantly displayed on screen.
TREND CHART ZOOM
Below is a table showing the available Zoom Levels for all CO
each interval for corresponding Zoom Levels:
Zoom Level (Time Span) (8)
1m (minute)
1h (hour)
1d (day)
1w (week)
Auto Cycle Zoom
The DOWN button will toggle the available Zoom Levels for each parameter. Note that in addition to
the Zoom Levels for each parameter, there is an option that will automatically cycle between the Zoom
Levels. This can be achieved by pressing DOWN until icon (8) appears at the top of the chart.
OPERATING INSTRUCTIONS
Time Per Interval
5sec /div
5m/div
2h/div
0.5d/div
Cycle
3
parameters, as well as the duration of
2

Publicidad

loading